5
EG
RATING DATA
1. Standard screwdriver
2. Phillips head screwdriver
3. Knife or wire stripper
4. Tape measure
5. Level
6. Sabre saw or key hole saw
7. Hacksaw
8. Core bits ø 5
9. Teflon or hemp
10. Hammer
11. Drill
12. Tube cutter
13. Tube flaring tool
14. Torque wrench
15. Adjustable wrench
16. Reamer (for reburring)
17. Hex. key
Tools required for installation (not supplied)
Emix Tank 200
Emix Tank 300
Power supply
230 V /1/50 Hz - 400 V /3N/50 Hz
Max power input
60 W
Max power input with electrical heaters
2x1000 W
Water connection
3/4” G – 3/4” G
Refrigerant connection (R410A)
3/8” – 3/8”
Solar coil connection
1” G
Max operating pressure
6 bar
Net weight
103 Kg
133 Kg
Packaged weight
115 Kg
145 Kg
Dimensions (H/W/D)
1460x620x640 mm
1875x620x640 mm
INTRODUCTION
Emix Tank
is an innovative indoor unit, able to provide domestic hot water from a thermodynamic source all year round,
i.e. independently of the system’s operating mode.
The purpose of Emix Tank is to produce domestic hot water through storage, using the energy produced directly from the
heat pump (therefore renewable energy) and providing the service at the same time as heating and cooling the environ-
ments.
Emix Tank 200 & 300 liters
Emix Tank 200 and 300 liters offers you a complete solution, including:
• The Emix concepts and components.
• A tank of 200 or 300 liters made in steel with porcelainized coating.
• A solar coil in Fe P195GH to be connected to a third parts solar panel system.
• Two per 1 kW electric elements managed by the electronics of Emix Tank.
• A thermostatic mixing valve to manage properly the hot water temperature.
Emix Tank is both a proper heat pump tank and a full feature electrical water heater.
Emix Tank is connected to the proper EMIX port of the heat pump (except outdoor units G30 and G42 where it can be
connected to a normal port, using the adapter from 3/8” to 1/4” for the liquid return fl are, included with the outdoor unit).
Further informations in the paragraph “ Only DHW application”.
Anyway, in case of outdoor unit failure, you can use Emix Tank as electrical water heater without the heat pump.
In addition to this, it is required:
• an expansion vessel (MINIMUM 18 l)
• a 3/4” water fi lter to be installed upstream of
Emix Tank tap water connection
• inlet and outlet service valves for Emix Tank
• a pressure reducing valve (check hydraulic dia-
grams).