11
V 06/17
The carbon fiber appliance may cause the risk of fire if, while
running, it is covered or comes into contact with
flammable
material
including curtains, drapery, blankets, etc.
KEEP THE PRODUCT
AWAY FROM THESE MATERIALS
.
Do not connect the product to the power supply until it has been
correctly assembled or positioned.
Do not run the cord under carpets. Do not cover the cord with
blankets, carpets or similar materials. Place the cord far away from
busy areas, or in a place where it cannot be pulled out accidentally.
Do not operate the carbon fiber heater in close proximity to
bathtubs, showers, washbasins or pools.
Do not position the appliance beneath a power socket.
Upon initial start-up, the product may emit a slight, harmless smell.
This smell is a normal effect of the initial heating up of the internal
heating elements, and should not recur later on.
WARNING:
ALWAYS UNPLUG THE APPLIANCE DURING MAINTENANCE
OPERATIONS, WHEN MOVING IT OR WHILE IT IS NOT IN USE
.
A carbon fiber heater contains parts that generate electrical arcs
and sparks. It must not be used in potentially dangerous areas, such
as areas at risk of fire or explosion, areas where chemical
substances are stored or areas subject to excessive humidity.
Do not use the appliance on soft surfaces such as beds, where the
grilles may get covered. Always stand the unit on a flat, stable
surface when in operation, in order to prevent it from overturning.
Always unplug the appliance when it is not in use.
Turn the appliance off if unattended, in order to prevent accidents.
In the event of any anomalies (abnormal noise or a strange smell),
immediately turn off the appliance; do not attempt to repair it but
take it to your local service centre.
You can adjust t
