UM Agitatore meccanico digitale ad asta AM 20-D ENG rev.0 12.05.2020
Cleaning and maintenance
•
Proper maintenance of the instrument guarantees its good condition and extends its life;
•
Disconnect the power supply cable during cleaning;
•
During cleaning, be careful not to spray the detergent inside the instrument;
•
Use only non-aggressive detergents that do not contain corrosive substances;
•
Before proceeding with cleaning or with any decontamination, the user must ensure that the method adopted
does not damage the instrument;
•
Wear appropriate protections when cleaning with chemicals;
•
If the instrument is to be sent to technical assistance, it is necessary to provide for proper cleaning and possible
decontamination by pathogens of the same. It is also advisable to put the instrument back in its initial packaging
to send it to the repair service.
Reference standards
The instrument was built in compliance with the following safety regulations:
EN 61010-1
UL 3101-1
CAN/CSA C22.2(1010-1) EN 61010-2-10
The instrument has been manufactured in compliance with the following EMC standards:
EN 61326-1
European guidelines:
EMC-guidelines: 89/336/EWG
Machine guidelines: 73/023/EWG
Technical features
Maximum amount of stirring (water)
20 liters
Absorbed power
120 W
Power supplied
100 W
Voltage
100
–
240 V
Frequency
50/60 Hz
Consumption
130 W
Speed range
50
–
2200 rpm
Display type
LCD
Display speed accuracy
±1 rpm
Maximum torque
60 Ncm
Overload protection
Flashing led, auto stop
Motor protection
Flashing led, auto stop
Maximum viscosity
50000 mPas
Spindle diameter range
0,5
–
13 mm
Dimensions (L x W x H)
220 x 186 x 83 mm
Weight
2,8 kg
Protection class DIN / EN60529
IP42
Working temperature
5
–
40 °C
Permissible relative humidity
80%
RS232 interface
Yes
