Subject to change · V 0.1 · 02.2020 · EN
Page 19
www.argo-hytos.com
10.3.3 Attaching the filter element
Fig. 7: Attaching the filter element
1. Check the filter element type number.
Does the laser inscription on the filter element match with the indications on
the type plate or in the operating manual?
2. Attach the filter element in arrow direction 2 and lock it in arrow direction 1.
10.3.4 Installing the filter element
Fig. 8: Installing the filter element
1. Carefully insert the cover (1) with the filter element (2) into the filter tube.
2. Screw in the cover manually until it stops.
A gap between cover and filter pipe may remain visible
(see Chapter 8.1 "Before commissioning" / Fig. 3)
10.4 Replacing the pump and the motor
Danger to life
Risk of electric shock
›
Before uninstalling, disconnect the device from the power supply and pull the mains plug. Uninstalling may
only be carried out by qualified electricians.
›
Electrical work on the off-line filter units has strictly to be carried out by qualified electricians. Danger of
electrical shock.
Risk of injury
Risk of injury by incorrect handling
›
Uninstalling may only be carried out by instructed persons.
DANGER
Risk of burns
Contact temperatures according to DIN EN563 (3) and DIN EN13202 (4) may be exceeded
during operation.
›
Allow the filter unit to cool down before touching it.
Risk of functional impairment
In case of dirt ingress into the pump during maintenance work, optimal functioning of the device is no
longer guaranteed (no manufacturer liability).
›
Work with special care when replacing the pump / motor.
›
All parts coming into contact with the hydraulic medium must be kept free from dirt and chips.
WARNING
CAUTION
