ARGENT BATH FILLERS
1. REMOVE THE PLASTIC BLANKING PLATE
2. Flush the lines to ensure there is no debris in the pipes
3. Install the Bath filler into the rough in body, ensuring that the hot and cold orientation is correct. Hot water
line on the bath filler has a red O- ring on the bottom.
4. Tighten using the four grub screws that held the plastic blanking plate in place.
5. Wet Test the bath filler including the functions of the spout and the handpiece.
6. Place cover cap in position
BATH FILLER FIT OFF
Argent Bath Filler
Care & Installation Guide
Technical Hotline
Customer Central
1800 356 717
1300 364 748
www.argentaust.com.au
1. This bath filler uses a progressive diverter cartridge.
2. Move the lever clockwise to activate the bath filler spout, the further forward you rotate the lever the fast
and warmer the water flows.
3. Move the lever counter clockwise to activate the shower, the further backwards you rotate the lever the
fast and warmer the water flows.
4. TWISTING OR STRECHING THE SHOWER HOSE MAY RESULT IN FAILURE, AND WILL VOID THE WARRANTY.
NOTES TO THE INSTALLER/ END USER.
1. THE SPECIAL CHROME FINISH ONLY REQUIRES
CLEANING WITH MILD HOUSEHOLD DETERGENT
AND DRY WITH A CLEAN COTTON CLOTH TO
RETAIN ITS LUSTROUS SHINE.
2. AVOID CLEANING WITH ABRASIVE MATERIALS OR
CLEANERS
CLEANING AND MAINTENANCE
STEP1
STEPS 3&4
STEPS 6
FM2963801
Rough-in Body
FM3493801
FLOW Bath Filler
FM3683801
LOFT Bath Filler
FM3693801
KUBIC Bath Filler
PRODUCT CODES
