Economic Type IR Hub
FEATURES
1. Two emitter output connections.
2. Power receptacle with LED indicator.
3. Three conductor 1/8” receptacle for interfacing with many brands of
freestanding IR receivers.
4. Compact size to place near audio/video equipment.
INSTRUCTIONS
○
1
Power
Connect a 12 VDC 200mA to 1A power supply to the power jack 2.1mm +
Tip – sleeve. The red LED will by illuminated when powered. This will
power all of the IR components connected to the system.
○
2
IR Receiver In
This is a three terminal 1/8” plug that is common to many of the free
standing IR receivers. This will connect the power, ground and signal.
Signal is Tip, ground is the ring and power is the sleeve.
○
3
Emitter Outputs
Connect IR emitters to the emitter jacks. Place the emitters on the
source equipment.
