Page 3
OPERATING INSTRUCTIONS:
POWER ON/OFF:
The receiver is powered on and off by inserting the headphone plug into the headphone jack. When you plug the
headphones in, the receiver will turn on. When you unplug the headphones, the receiver will turn off after several
seconds.
SELECTING THE LISTENING CHANNEL:
The receiver will show the channel number it is tuned to on the left side of the LED display (Diagram #9). Select the
channel number for the receiver to “tune-to” by pressing the “CHANNEL UP” (Diagram #2) or “CHANNEL DOWN”
button (Diagram #3) on the front of the receiver. The “CHANNEL UP” button will make the channel step up by one.
The “CHANNEL DOWN” button will make the channel step down by one. There are a total of 14 channels to choose
from.
ADJUSTING THE LISTENING VOLUME:
Press the “VOLUME UP” button (Diagram #4) or “VOLUME DOWN” button (Diagram #5) to raise or lower the volume
level. When the receiver is powered on, the volume will default to 07. The volume can be set between the range 0
and 16.
Pressing the “MUTE” button (Diagram #6) will mute the sound and the volume number will flash in the display. Press
the “MUTE” button a second time to restore.
RESETTING THE RECEIVER:
The receiver is equipped with built-in, self-protection circuitry that will activate when receiving a variety of electrical or
environmental circumstances. This may cause the unit to lock-up or behave in an undesired fashion. If this occurs,
reset the receiver by disconnecting it from the power source for one minute. This will restart the software and should
return the unit to normal operation. If problems persist, please contact your dealer or ARG for further assistance.
