Areva MiCOM P921 Скачать руководство пользователя страница 349

Страница: 349 / 376

Technical Guide

P92x/EN CM/E11

Commissioning Guide

MiCOM P921-P922-P923

Page 27/28

8.4

Changing the battery

Each relay has a battery to maintain records (P922-P923) and the correct time in case

the auxiliary supply fails. The data maintained in a P922-P923 relay thus includes

event, fault and disturbance records at the time of failure.

This battery will periodically need changing, although an alarm will be given as part

of the relay's periodic self-monitoring in the event of a low battery condition.

8.4.1

Instructions for replacing the battery

Open the bottom cover on the front of the relay.

Gently extract the battery from its socket. If necessary, use a small screwdriver to prize

the battery free.

Ensure that the metal terminals in the battery socket are free from corrosion, grease

and dust.

The replacement battery should be removed from its packaging and placed into the

battery holder, taking care to ensure that the polarity markings on the battery agree

with those adjacent to the socket.

NOTE:

Only use a type ½AA lithium battery with a nominal voltage of
3.7V.

ENSURE THAT THE BATTERY IS SECURELY HELD IN ITS SOCKET AND THAT THE
BATTERY TERMINALS ARE MAKING GOOD CONTACT WITH THE METAL TERMINALS
OF THE SOCKET.

Close the bottom cover on the front of the relay.

8.4.2

Post modification tests

To ensure that the replacement battery will maintain the date and time if the auxiliary

supply fails, change the date and time on the relay, then disconnect and reconnect

the auxiliary supply. The date and time should be maintained.

8.4.3

Battery disposal

The battery that has been removed should be disposed of in accordance with the

disposal procedure for Lithium batteries in the country in which the relay is installed.

8.5

Cleaning

Before cleaning the equipment ensure that all inputs (auxiliary supply, current,

voltage) are isolated to prevent any risk of electric shock.

The equipment may be cleaned using a clean, damp cloth. Do not use detergents,

solvents or abrasive cleaners as they may damage the relay's surface and leave a

conductive residue.

Содержание MiCOM P921

























































































































































































































































































































































































Результаты поиска

Содержание MiCOM P921

Отзывы:

Бренды по названию

Популярные бренды

Areva MiCOM P921, Техническое руководство

Результаты поиска

Содержание MiCOM P921

Отзывы:

Бренды по названию

Популярные бренды