Areson L901LR, Руководство пользователя

Страница: 9 / 9

15 16
b. In the DPI adjustment area, drag the axis along the DPI scale. Meanwhile, the DPI figure is
changing and shown on the right side of the DPI scale.
Note: The computer will save new resolution into mouse automatically.
a. Click the level of DPI you are going to adjust. There are 4 levels can be chosen.
c. Tick the option of "Setting X axle and Y axle resolution independently" if you would like to adjust the 2
axles individually.
Backup :
Backup your mouse setting to file.
Restore :
Restore mouse setting from file.
Reset :
It will reset all setting of mouse.(macro will be deleted)
This symbol on the product or in the instructions means that your electrical and electronic equipment should
be disposed at the end its life separately from your household waste. There are sparate collection system for
recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased the product.
FCC statement
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation if this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
To assure continued compliance, any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment. (Example-use only
shielded interface cables when connecting to computer or peripheral devices).
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference. and
(2) This device must accept any interference received, including interference that may cause
undesired operation.