1. Insert the batteries
a. Take out the receiver on the bottom case first, press the battery cover release button on
the bottom of the mouse which is under the receiver.
b. Remove the battery compartment cover on the top case of the mouse.
c. Fit in the batteries accordingly to the diagram indicated in the battery cabinet.
d. Close the battery compartments cover properly.
e. Make sure the Power on-off swich on the bottom of the mouse is ON.
f. The Low Power LED in the wheel bar will blink 3 seconds if the mouse power is on.
Wheel button
Dpi button
Battery cover
ID reset button
LED indicator
Receiver
Mouse
Receiver
Introduction
Congratulations on your purchase of the most innovative wireless mini mouse. With an
incredible sensitivity to surface details and high tracking speed than other mice, the mouse
can track reliably even on tricky polished or wood-grain surfaces. It offers even more
advance that will make you more productive and more comfortable.
A. Hardware Installation
2.4GHz (distance 6~8m), 16 Channels/4096 ID
Using state-of-art technology. High tracking speed and sensitivity.
Storable mini receiver
Longer battery life - 6~8 months.
Auto-Link, Plug and Play! No need to set the channel ID.
Power on/off switch
Data report rate : 125 Report/Sec.
800/1600 dpi switchable button.
2*AA Alkaline batteries included.
Power on/off
switch
Features
+
-
A wrong battery placement
may cause batteries overheat.
Battery compartment cover
2 * AA batteries
Battery cover
release button
Low power Led/
Power on indicator/
Dpi switching indicator
2. Connect the receiver
a. Turn on your PC.
b. Connect the receiver to USB port on PC
.
PC
USB port
The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any
button of the mouse" is compulsory to wake it up.
Power on/off:
There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.
Users can push DPI button to change the resolution. The low power LED will be flashed when dpi has been
successfully swithced.
3. Communication : The mouse & the receiver
The 2.4Ghz RF mouse features a dual-way transmission technology which enables the
mouse and the receiver auto-communication.
A. Auto-link mode
1. Make sure the Power On-Off Switch on the bottom of the mouse is ON.
2. Operate the mouse, and the LED in the receiver will blink fast. Now the mouse and the
receiver is auto-linked successfully.
