Ares RECON FPV, Руководство пользователя

Страница: 12 / 25

12
3. When the battery is connected the LED lights will flash. Place the Recon on
a level surface to enable the on-board gyro to be properly calibrated.
4. Switch the transmitter ON by pressing the power button. The quad’s LEDs
will now stop flashing and emit a solid light indicating that the Recon and
the transmitter are paired.
5. Arm the motors by pushing the throttle stick forward to its stop, then back
to its lowest point. Your Recon FPV is now ready to fly. Before taking off
move the quadcopter to a clear / open space that’s free of people, animals
and obstacles, then stand clear yourself. Position the quad with the battery
cover facing you and the camera facing away. If you’ve never flown an R/C
quadcopter before, read the section entitled ‘Flying Your Recon FPV’.
Flying Your Recon FPV
Where quadcopter flying is concerned it’s not possible to have too much space.
As such, we recommend that you fly your Recon in a large enough area to
ensure that control is relaxed and you have time to think. If flying outside we
also recommend that early flights be carried out in calm conditions.
If you’re new to R/C quadcopters set the Agility Mode to ‘Low’ before flying and
take things gently to give yourself time to get familiar with the sensitivity of the
controls. R/C flying is a skill that requires practice to master, so be prepared to
undertake many flights before you get proficient. The following is a list of the
controls you have at your disposal. Make sure you familiarize yourself with their
effect on the quadcopter before you fly it.
(Mode 2 Transmitter Shown)
(Mode 2 Transmitter Shown)