Ares GAMMA 370 V2, Инструкция по эксплуатации

Страница: 8 / 16

8
Locate the landing gear assembly and
insert into slot at the rear of the battery box.
Locate the main wing halves.
It is not necessary to glue the wing halves
together. If you decide to permanantly join
the wings you can glue or use double stick
Locate the LED wiring Y-connector and plug
in the wing LEDs, making sure to maintain
correct orientation of the plugs.
Using two washer head screws, secure the
landing gear to the fuselage.
Slide the two halves partially together.
tape (not included). Slide the wing halves
completely together.
Tuck the wires into the fuselage while fitting
the wing into position.