29
English
8.
If the "WELL DONE" indicator glows continuously, then the roasting process
is complete and you hear a beep. Then the appliance automatically switch
-
es off. Open the handle and check the food.
Caution! The smart mode cannot be used if the grille is used in the open position.
Manual mode
1.
Insert the mains plug into the socket and you hear a beep.
2.
Press the ON/OFF button "
" to start the appliance. Press the "
"
button to start the manual mode.
3.
Then press the "OK" button. The appliance starts to preheat. At this time,
only the "PRE-HEATING" indicator flashes.
4.
When preheating is completed, you hear a beep. The "PRE-HEATING"
indicator glows continuously and the other four status LEDs flash one after
the other.
5.
Place the food on the grilling surface and then close it. The appliance starts
the roasting process. In manual mode, the thickness of the food is not
detected and there is no status reminder. Check the status of the food after
a few minutes.
Helpful tips:
•
For satisfactory results, apply a little cooking oil or cooking spray to the
plates.
•
Close the grill plates during preheating. In manual mode, there is no detec
-
tion function, which means that the appliance continues to run for about
two hours until it automatically turns off.