3/4
USER'S MANUAL
green = E).
It is essential that each projector is correctly
grounded and that the electrical installation
complies with all current good technical and
safety standards.
Position the fixture body on the mounting plate
and firmly tighten the two side bolts of the base.
Soul LED allows you to adjust the projection angle
both on the horizontal plane and on the vertical
plane.
Loosen the two Allen screws on both sides of the
fork to adjust the angle vertically; the graduated
scale will help you in positioning.
Once the projector is in the desired position, firmly
tighten the two Allen screws again. The fork allows
an adjustment of the projection angle of 30°/+90°
with respect to the horizontal.
To adjust the horizontal plane, loosen the two
Allen screws on both sides of the base; the
graduated scale will help you in positioning. The
system allows the LED head to rotate 30° to the
right and 30° to the left. Once the projector is in
the desired position, firmly tighten the two Allen
screws again.
In case of installation for direct lighting, pay
particular attention to avoid dazzling phenomena
towards people present.
Note:
In some installations it may be necessary to
comply with local regulations regarding the
reduction of light pollution. To be used in these
situations, Soul LED must be installed facing
exclusively downwards.
