KS-CC1 User Manual
16
www.arec.com
1.1.1 Video inputs
The KS-CC1 can be set with one video input at the same time.
1.1.1.1 Content
Name
Signal Type
Edit the name of the video input source.
Select the signal type of the video input from
Video port
,
Network Camera
, or
IP source
.
Video port
Under “Video port”, KS-CC1 lists HDMI input 1 & 2 and all the USB video sources connected to it.
You may select one as video source and configure its profile. The available options are: format*,
resolution(max.), and FPS(max.)**
* Format refers to video format, there is two formats supported which are: MJPEG and YUV
** KS-CC1 will set the video source to the highest resolution and FPS it supports, but not exceed the
max resolution and FPS set here.
Network Camera
To connect an IP camera as the video source, select from the camera’s IP address from the dropdown
list of those available.
* Note: A login authentication with the camera would be required.
See “Media I/O”
→
“Network device manager” for more details.
IP Source
To connect an IP source, select protocol first. The supported protocols are RTP, RTSP, or RTMP. Enter
the primary and secondary URL and port number if needed.
