CI-T10 User Manual
38
Chapter 3. Network Connection
You can connect your camera to a PC or notebook with standard network cable and enter the management site via your
Internet browser or connect your camera to a router or any DHCP server. See below for details.
3.1 Direct connection
To access the camera for the first time, connect the camera and computer by network connecting cable.
The computer must have the network segment where the camera IP address belong to. The device will not be accessible
if without the segment. I.E. The camera default IP address is 192.168.11.202, then segment 11 must be added in the
computer. Specific steps are as below :
(
a)
Click “
Open Network and Sharing Center
”.
Содержание CI-T10
Страница 16: ...CI T10 User Manual 16 Open the Firmware file img Click Upgrade button 4 Click Firmware Update page...
Страница 18: ...CI T10 User Manual 18 Note2 Cannot find the path please Re plug the USB...
Страница 20: ...CI T10 User Manual 20 1 2 4 VISCA networking as shown below...
Страница 53: ...CI T10 User Manual 53...