AREBOS AR-HE-TBM500, Руководство пользователя

Страница: 6 / 20

User’s manual – A
REBO
S Bench drill 500W
6
 Break long drilling chips by interrupting the drilling process by briefly turning back the turning
wheel. There is a risk of injury due to long drilling chips.
 Keep handles dry, clean and free of oil and grease. Greasy, oily handles are slippery and lead
to loss of control.
 Use fixtures to clamp the workpiece. Do not machine workpieces that are too small to clamp.
If you hold the workpiece by hand, you cannot secure it sufficiently against twisting and
injure yourself.

Turn off the power tool immediately if the insert tool blocks. The insert tool will lock if: the
power tool is overloaded or it cants in the workpiece to be machined.

Do not touch the insert tool after machining until it has cooled down. The insert tool
becomes very hot when working.
 Inspect the cable regularly and have a damaged cable repaired only by an authorised service
centre. Replace damaged extension cables. This will ensure that the safety of the power tool
is maintained.
 Keep the unused power tool safe. The storage area must be dry and lockable. This prevents
the power tool from being damaged during storage or from being operated by inexperienced
persons.

Never leave the tool before it has come to a complete stop. Trailing insert tools can cause
injuries.

Do not use the power tool with a damaged cable. Do not touch the damaged cable and
disconnect the power plug if the cable is damaged during work. Damaged cables increase the
risk of electric shock.
1.4 Precautions against accident hazards

Do not look directly into the laser beam with an unprotected eye.
 Never look directly into the beam path.

Never point the laser beam at reflective surfaces, persons or animals. Even a low-power laser
beam can cause damage to the eye.

Caution! If procedures other than those specified here are used, this can result in dangerous
beam exposure.

If the cross-cut saw is not used for an extended period of time, the batteries should be
removed.
 Do not replace the laser with another type of laser.
 Repairs to the laser may only be carried out by the manufacturer of the laser or an
authorized
1.5 Residual risks
 The power tool is built according to the state of the art and the recognized safety regulations.
Nevertheless, individual residual risks may occur during operation.
 Danger to health from electricity if incorrect electrical connection cables are used.
 Furthermore, despite all precautions taken, there may be non-obvious residual risks.
 Residual risks can be minimized if the "Safety Instructions" and the "Intended Use" as well as
the operating instructions are observed in their entirety.

Do not stress the machine unnecessarily: excessive pressure during sawing will quickly
damage the saw blade. This can lead to a reduction in machine performance during
processing and a reduction in cutting accuracy.

Avoid accidental start-up of the machine: the operating button must not be pressed when
inserting the plug into the socket.
 Use the tool recommended in this manual. This will ensure that your saw performs optimally.