User’s Manu
al
–
A
REBO
S Reciprocating Saw
4
1.2 Work area safety
•
Keep the work area clean and well lit. Untidy or dark areas can lead to accidents.
•
Do not operate power tools in areas where there is a danger of explosion, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks, which may ignite the
dust or fumes.
•
Keep children and bystanders away while operating a power tool. Distractions may lead to a
loss of control over the tool.
1.3 Electrical Safety
•
Power tool connecting plugs must fit into the socket. Never modify the plug in any way. Do
not use any adapter plugs with earthed power tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
•
Avoid body contact with earthed surfaces, such as pipes, radiators, ranges, stoves and
refrigerators. There is an increased risk of electric shock if the body is earthed.
•
Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
•
Use the cables for its intended purpose only. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
•
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Using a cable suitable for outdoor use reduces the risk of electric shock.
•
If it is unavoidable operating the power tool in a damp location, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
1.4 Personal Safety
•
Be careful, pay attention to you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power tools may result in serious
personal injury.
•
Use personal protective equipment. Always wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard helmet or hearing protection used for appropriate
conditions will reduce personal injuries.
•
Prevent unintentional starting. Make sure the power tool is switched off before connecting
Warning!
Danger of crushing hands!
Be careful when using this product.
This machine corresponds to safety level II, which means that the machine is
equipped with advanced and double insulation.
