background image

User’s Manual –

 A

REBO

S Domestic waterworks 1000 W 

 

 
 

substances, etc. in the pumping liquid for a long time. Since the pumping liquids may 
contain corrosive chemical substances, it is of particular importance to prevent their 
action on the material of the pump body. 

 

Sand and stones in the pumping water can cause the pump to wear out quickly and 
reduce its effective performance. Therefore, the installation of a filter is necessary. 

 

If too much pump water flooded the area to be irrigated due to your own fault, you must 
take a number of protective measures (such as the installation of a water disposal 
device, an alarm device, a reserve pump, a water tank, etc.). In any case, the 
manufacturer is not responsible for any damage or loss caused thereby. 

 

 

This pump is not suitable for the transport of drinking water! 

 

Only use extension cords intended for outdoor use. Always unroll cable drums 
completely. 

 

Protect cables from heat, oil and sharp edges. 

 

Only use the device and extension cable in a technically perfect condition! Damaged 
devices must not be operated. 

 

Never carry the pump by the cable. 

 

The power supply must be in accordance with the specifications given on the product. If 
necessary, ask your energy supply company for the necessary connection conditions. If 
the pump and power cord do not meet the conditions, do not connect the pump! 

 

Never remove the plug or shorten the cable. Keep the connections (plug and socket) dry. 

 

Unauthorized modifications or changes to the device are prohibited. 

 

When the garden pump is in operation, the water outlet (such as the tap or sprinkler 
system) must be open to allow air to escape from the hose. If the water outlet is closed, 
the pump may be damaged by overheating after more than 5 minutes of operation. 

 

Prior to use, always visually inspect to see if the pump, especially the power cord and 
plug, is damaged. 

 

Never touch the power plug with wet hands. 

 

It is absolutely forbidden to reach into the opening of the pump with your hands when 
the device is connected to the mains. 

 

A direct connection to the public drinking water network for drinking water supply is not 
permitted. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание AR-HE-HWW1000

















Отзывы: