Original User Manual
–
A
REBO
S Upright Vacuum Cleaner Eco
10
6. Assembly of the filter unit
6.1 The HEPA filter has 3 guide lugs. Set the largest guide lug
into the largest recess of the coarse filter.
Tighten the HEPA filter by turning it clockwise. It must audibly
engage.
6.2 Set the filter unit into the dust container. The rounded guide
lug must sit exactly in the rounded recess.
6.3 Reattach the cover to the dust container. Set the arrow on
the cover just over the arrow at the side of the symbol.
6.4 Tighten the cover in the direction. It must audibly engage.
6.5 Reattach the dust container to the motor housing. Set the
dust container first at the bottom part to the motor housing, so that the electric contacts are
matched. Then engage it to the top. For this, press the smooth area of the button (1).
Outlet Filter
The appliance is also equipped with an outlet filter. It is on the right side of the appliance.
CAUTION: You cannot remove this filter.
Cleaning
•
WARNING: Always disconnect the appliance from the power supply unit before cleaning!
•
Under no circumstances should you immerse the motor housing in water in order to clean
it. Otherwise this might result in an electric shock or fire.
•
Do not use a wire brush or any abrasive items.
•
Do not use any acidic or abrasive detergents.
•
The single components are not dishwasher-safe.
•
Wipe the casing with a damp cloth.
•
You can wipe the mains adapter unit with a dry cloth.
Floor Nozzle
1. Disconnect the floor nozzle from the suction pipe.
2. Turn the floor nozzle around, so that you see the lower
side.
Turn the lock of the brush roller on the left side
counterclockwise with tool to unlock the brush roller. the
lock of the brush roller on the left side.
3. Pull out the brush roller.
4. Remove threads and hair wound to the brush. Use
scissors, if required.
5. Assembly
:
Refer to the adjacent figure.
5.1 Set the brush roller at position (1). Make sure that the
triangular recess on the brush roller is positioned correctly.
5.2 Return the bearing of the brush roller into the housing of the floor nozzle (position 2).
6. Close the lock of the brush roller. It must audibly engage.
