User’s Manual
–
A
REBO
S Glass ceramic cooktop 4 hot plates
7
the cooking zones
.
If you
have
not
selected a program
within
about
two minutes
, the unit
will
return to
standby
.
4.2 Power
•
Press the button
for the desired cooking zone. You can use the
"1-14" buttons to change the power in stages or by pressing the "0" button to switch off the
corresponding cooking zone. The operation of four zones is the same. The only difference is
that the heating zone at the bottom left and the heating zone at the top right have two
heating circuits.
•
up to max.
1800 W
•
up to max.
2200 W
•
up to max.
1200 W
•
up to max.
2000 W
4.3 Extra cooking zone circle for the cooking zone bottom left
•
The hotplate on the left down and the hotplate on the right top are equipped with two
cooking zones. The outer cooking zone circuits are switched on / off with the
button.
4.4 Residual heat indicator
•
When the hob has been operating for some time, there will be some residual heat.
The residual heat indicator warns for each cooking zone separately with the "H" symbol.
4.5 Timer
•
Press the timer button
until the desired LED lights up. The display shows "00". With the
buttons
/
, you can set the time in 1-minute steps (max. 99 min.)
•
After 5 seconds without pressing the number key, the time measurement begins and the
display shows the countdown time. If different times have been set for the zones, the display
shows the zone with the lower time setting.
•
During operation it is still possible to change the time by adding or subtracting one minute to
the remaining time. After the time has elapsed, the corresponding cooking zone turns itself
off.
•
You can also end the timer early. Press the timer button to select the zone whose timer you
want to cancel. Then press t
he “0” number key tw
ice and the timer function is canceled.
