User’s Manual
–
A
REBO
S Glass ceramic cooktop 4 hot plates
5
•
Warning!
Children should be supervised to ensure that they do not play with the appliance.
•
Prior to connecting the device, check whether the voltage indicated on the type plate
corresponds to the voltage supply in your home. A wrong connection may lead to grave
damage on the device and injury to persons.
•
The hotplate's surface consists of temperature-resistant ceramics. In case of damage, even if
this concern only a small tear, disconnect the device from the power supply immediately and
contact the customer service.
•
We recommend not placing any metal kitchen utensils, cookware or pan lids, knives or other
metal objects on the hotplate. These may heat up when the device is turned on.
•
Do not place any magnetically objects like credit cards, cassettes etc. on the glass surface
while the device is in operation.
•
On order to avoid overheating, do not place any aluminium foil or metal plates on the device.
•
Do not insert any objects like wires or tools into the ventilation slots.
Attention:
this may
cause electric shocks.
•
Do not touch the hot surface of the ceramic field. Please note: the hotplate does not heat up
itself during cooking, but the temperature of the cookware heats up the hotplate!
•
Do not heat up any unopened tins on the hotplate. A heated tin could explode. Therefore,
remove the lid under all circumstances beforehand.
•
Caution!
Surface remains hot after use!
Do not touch the top plate right after removing the pot or the pan, as the top plate will still
be very hot.
2.
Installing the device
•
Place the device on a stable and level surface.
•
Never place the device on a flammable surface (e.g. table cloth, carpet, etc.).
•
Do not place hotplates next to open fires, heaters or other sources of heat.
•
Make sure that the mains connection cable is not damaged or squashed beneath the device.
•
Make sure that the mains connection cable does not come into contact with sharp edges
and/or hot surfaces.
•
Cut a hole in the worktop. At least 1.97 in (50 mm) of space should be left around the hole.
The worktop should be at least 1.18 in (30 mm) thick and made of heat-resistant material.
