User
’
s manual
–
A
REBO
S Electric metal cutting shear 380 W
7
Replacing the cutting blade / inserting the punching head
•
Unscrew fixing screws (1), upper guide (2), lower guide (2) and remove both guides. Open the
threaded sleeve (3) with the open-end wrench provided and pull downwards away. To
prevent the remaining loose body (4) from falling out, hold the device upside down. Remove
the body (4) from the device. The cutting blade can now be pulled out of its guide and
replaced with a new blade or the round punch head. To reassemble, follow the steps
backwards. Make sure that the body is back in the guide groove.
•
For the round punching head (4) the supplied body (3) is required. Insert the punch head into
the main unit. Then fit the body (3), onto the groove and screw it to the threaded sleeve (1).
With the larger of the two hexagonal wrenches supplied, the grub screw (2) can be opened
and the cutting direction changed.