Original-Bedienungsanleitung
–
A
REBO
S SUP Board Stand Up Paddle Board
8
2.3 Mounting the paddle
•
The paddle is assembled by simply plugging the two end parts together.
Stabilize the joint by closing it with the safety lock.
2.4 Paddling with the SUP Board
•
If you stand comfortably, place your feet about shoulder wide apart. Bend your knees
slightly, pull your shoulders back and look straight ahead.
•
Stand in the middle of the board.
•
Place your
“
strong
”
hand at the top of the handle and grasp the paddle with your second
hand about 60 cm further down. Paddle with a comfortable forward motion, with slightly
flexed arms.
•
Push the complete rudder into the water before you displace the water.
•
Move your weight to the right if you want to turn left and vice versa.
3.
Hints and Precautions
3.1 Tips for inflating
•
Inflate the board 24 hours before first use.
•
After 2 to 3 days the air pressure may drop, in which case the product must be inflated again.
•
Do not inflate the board too much, inflation at more than the required pressure will worsen
the product (never more than 15 psi).
•
If you intend to expose the board to direct sunlight, reduce the air pressure slightly.
Remember however, to inflate the board before use and restore optimum pressure.
Note: Heat increases the pressure inside the board. When it is cold, however, the pressure
decreases.
