Original-Bedienungsanleitung
–
A
REBO
S SUP Board Stand Up Paddle Board
6
2.
Assembly and Use
2.1 Mounting the air pump
•
At the beginning, prepare the air pump for start-up. Install the connection piece between the
pump and the hose. Make sure that the connection for the pressure gauge is facing upwards
and that the piece is on the "Inflate" side.
Snap the connector into place.
•
Turn in the pressure indicator firmly, otherwise the pump will not function properly.
Insert the hose into the device at the black end piece and let it snap into place. The pump is
now ready for use.
•
To connect the board to the air pump, first unscrew the cap. Connect the red end piece of
the pump hose to the connection on the surfboard. The hose sits correctly when there is a
clicking noise and a soft hissing sound. You can start to inflate.
