Ardo TL107SA, Инструкция, Страница: 32 / 36

8
SM3187
CONTROL PANEL
EN
Unbalanced load control during spin cycle:
This washing machine is equipped with a special electronic control system for proper load balancing.
Prior to every spin, the system makes sure that the cloths are spread as evenly as possible in the drum.
In the case of uneven laundry distribution, for safety reasons, the final spin speed will be reduced
and in cases of high load imbalance, it will not be performed.
DELAYED START: Touch the “DELAYED START” symbol to delay the start of the
wash cycle by up to 8 hours. Press the symbol repeatedly until the required delay
time is indicated by the appropriate LED.
Confirm by starting the washing cycle using the
START function.
TEMPERATURE: Touch the “TEMPERATURE” symbol to set the desired wash
temperature (see program table). The appropriate LED will light up, indicating the
temperature chosen. To perform a “
cold” program, touch the “TEMPERATURE”
symbol until all LEDs are off.
The machine will automatically prevent from setting a temperature higher than the
temperature expected for each program.
PROGRAM PHASE INDICATOR LEDs: The progressive lighting up of the icons will
indicate the program phase the washing machine is currently effecting.
PREWASH: To perform a prewash, touch the “PREWASH” symbol ­ the appropriate
LED will light up and then add the detergent in the drawer
1.
The washing machine performs a prewash cycle at 40°C, max. Prewash is recom­
mended for garments soiled with dust, dirt and sand or with particularly stubborn
stains. See the program table for further information.
ADJUSTABLE SPIN: Touch the “SPIN” symbol to select the desired spin speed.
The machine will automatically prevent from setting a spin speed which is higher
than the maximum value expected for each program. The lit LED will indicate the
selected speed value. Select the spin exclusion symbol
to exclude the spin
cycle at the end of the cycle.
N.B.: The maximum spin speed varies depending on the model. The speed matched
to each program is recommended.