background image

Operator's Manual

Viper® 212cc 4-Cycle Engine

Check for parts online at 

www.ardisam.com

 or call 800-345-6007 M-F 8-5

4

 WARNING

ENGINES GIVE OFF CARBON MONOXIDE, AN 

ODORLESS, COLORLESS, POISONOUS GAS. 

 

CARBON MONOXIDE MAY BE PRESENT EVEN IF 

YOU DO NOT SMELL OR SEE ANY ENGINE EXHAUST. 

BREATHING CARBON MONOXIDE CAN CAUSE 

NAUSEA, FAINTING OR DEATH, IN ADDITION TO 

DROWSINESS, DIZZINESS AND CONFUSION.  
IF YOU EXPERIENCE ANY OF THESE SYMPTOMS, 

SEEK FRESH AIR AND MEDICAL ATTENTION 

IMMEDIATELY.  
START AND RUN ENGINE OUTDOORS.  DO NOT 

START OR RUN ENGINE IN ENCLOSED AREA, EVEN 

IF DOORS OR WINDOWS ARE OPEN.
HOT GASES ARE A NORMAL BY-PRODUCT OF A 

FUNCTIONING CATALYTIC CONVERTER. FOLLOW 

ALL SAFETY INSTRUCTIONS TO PREVENT BURNS 

AND FIRES.
DO NOT ALTER/MODIFY ENGINE:
NEVER ALTER OR MODIFY THE ENGINE FROM 

THE FACTORY. SERIOUS INJURY OR DEATH MAY 

OCCUR IF ENGINE IS MODIFIED OR ALTERED.
WHEN WORKING ON OR REPLACING PARTS FOR 

THE ENGINE OR PRODUCT, YOU MUST ALWAYS 

DISCONNECT SPARK PLUG WIRE FROM THE SPARK 

PLUG AND KEEP IT AWAY FROM THE SPARK PLUG.

ENGINE SAFETY PRECAUTIONS

Preventing Carbon Monoxide Poisoning

• 

Never try to ventilate engine exhaust indoors. Carbon 

monoxide can reach dangerous levels very quickly.

• 

Never run engine outdoors where exhaust fumes 

may be pulled into a building.

• 

Never run engine outdoors in a poorly ventilated area 

where the exhaust fumes may be trapped and not 

easily taken away. (Examples include: in a large hole 

or areas where hills surround your working area.)

• 

Never run engine in an enclosed or partially enclosed 

area. (Examples include: buildings that are enclosed 

on one or more sides, under tents, car ports or 

basements.)

• 

Always run the engine with the exhaust and muffler 

pointed in the direction away from the operator.

• 

Never point the exhaust muffler towards anyone. 

People should always be many feet away from the 

operation of the engine and its attachments.

• 

Do not change the engine governor settings or over-

speed the engine.

• 

Stay away from rotating parts. Place protective covers 

over rotating parts.

• 

Do not use engine around dry brush, cloth rags, or 

other flammable materials.

• 

Always keep materials and debris clear of muffler 

guard and other hot engine parts.

• 

Never operate the engine without the muffler guard 

in place.

• 

Always make sure the exhaust pipe is free of foreign 

objects.

• 

The engine exhaust becomes very hot during 

operation.  Keep engine at least three feet away from 

buildings and other equipment during operation.  

• 

Wear appropriate clothing such as a long-sleeved 

shirt or jacket. Also wear long trousers or slacks. Do 

not wear shorts.   Never wear sandals, sneakers, or 

open shoes, and never operate the machine with 

bare feet. 

• 

Do not wear loose clothing or jewelry. They can get 

caught in moving parts.  Always keep hands, feet, hair 

and loose clothing away from any moving parts on 

engine and machine.

Содержание Viper 212cc

























Отзывы: