Ardisam Earthquake E43WC, Руководство оператора и взрывные схемы запчастей

Страница: 7 / 16

ASSEMBLY INSTRUCTIONS ANd pARTS ExpLOSIONS
E43WC Model
page 7 800-45-6007
Filling Gas Tank
1. Shut-off engine and allow engine to completely cool before refill-
ing the gas tank.
2. Move to a well ventilated area, outdoors, away from flames and
sparks.
3. Clean debris from area around the gas cap.
4. Loosen gas cap slowly. Place the cap on a clean, dry surface.
5. Carefully add fuel without spilling.
6. Do not fill gas tank completely full, allow space for fuel to ex-
pand.
7. Immediately replace gas cap and tighten. Wipe off spilled fuel
and allow to dry before starting engine.
NORMAL OpERATION
1. The clutch will transfer maximum power after about two hours
of normal operation. During this break-in period clutch slippage
may occur. The clutch should be kept free of oil or other mois-
ture for efficient operation.
2. Never run engine indoors. Exhaust fumes are deadly.
CAUTION
!
AvOId INjURY! ALWAYS hANdLE FUEL IN A WELL
vENTILATEd AREA, OUTdOORS, AWAY FROM
FLAMES OR SpARkS.
AvOId INjURY! dO NOT START ENGINE IF FUEL
IS SpILLEd. WIpE OFF ExCESS FUEL ANd ALLOW
TO dRY. REMOvE ENGINE FROM AREA TO AvOId
SpARkS.