background image

For additional information email 

[email protected]

 or call 800-345-6007 M-F 8-5 CST

6

Operator’s Manual 

20970 Front Tine Tiller

OPERATION

• 

Do not operate tiller under the influence of alcohol or 

drugs.

• 

Never operate tiller without guards, covers, and hoods 

in place.

• 

Keep hands, feet, and clothing away from rotating 

parts. Keep clear of tiller tines at all times.

• 

Tines rotate when tiller is engaged; tines rotate 

when the drive safety control lever is pulled down. 

Releasing the drive safety control lever to neutral 

stops the tines.

• 

Use extreme caution when operating on or crossing 

gravel drives, walks, or roads. Stay alert for hidden 

hazards or traffic.

• 

After striking a foreign object, stop the engine, 

remove the wire from the spark plug, thoroughly 

inspect the tiller for any damage, and repair the 

damage before restarting and operating the tiller.

• 

If vegetation clogs the tines, stop the engine and 

disconnect the spark plug wire before removing 

vegetation by hand.

• 

If the unit should start to vibrate abnormally, stop the 

engine and check immediately for the cause. Vibration 

is generally a warning of trouble.

• 

Do not run the engine indoors; exhaust fumes are 

deadly.

• 

Do not overload the machine capacity by attempting 

to till too deep at too fast of a rate.

• 

Never operate the tiller without good visibility or 

light.

• 

Be careful when tilling in hard ground. The tines may 

catch in the ground and propel the tiller forward. 

If this occurs, let go of the handle bars and do not 

restrain the machine.

• 

Take all possible precautions when leaving the 

machine unattended. Disengage control lever, stop 

the engine, wait for all moving parts to stop, and 

make certain guards and shields are in place.

• 

When leaving the operating position for any reason:

 

- shut off the engine.

 

- wait for all moving parts to stop.

MAINTENANCE AND STORAGE

• 

Keep machine, attachments and accessories in safe 

working condition.

• 

Check shear bolts, engine mounting bolts and other 

bolts at frequent intervals for proper tightness to be 

sure the equipment is in safe working condition.

• 

To prevent accidental starting, always disconnect and 

secure the spark plug wire from the spark plug before 

performing tiller maintenance.

• 

Never run the engine indoors. Exhaust fumes are 

deadly.

• 

Always allow muffler to cool before filling the fuel 

tank.

• 

Never store equipment with gasoline in the tank 

inside a closed building where fumes may reach an 

open flame or spark. Allow the engine to cool before 

storing in any building.

• 

Always refer to the operator’s guide instructions for 

important details if the tiller is to be stored for an 

extended period.

THE RIGHT AND LEFT SIDES 

OF YOUR ROTOTILLER ARE 

DETERMINED FROM THE 

OPERATING POSITION AS 

YOU FACE THE DIRECTION OF 

FORWARD TRAVEL.

ENGINE IS SHIPPED FROM FACTORY WITHOUT OIL. 

YOU MUST ADD ENGINE OIL BEFORE STARTING 

ENGINE.
NEVER START THE ENGINE OR OPERATE THE TILLER 

WITH THE WHEELS IN THE FREE-WHEEL POSITION. 

MAKE SURE THE WHEEL LOCK PINS ARE ENGAGED 

THROUGH THE WHEEL HUBS AND WHEEL AXLE. THE 

WHEELS ACT AS A BRAKE TO KEEP THE TILLER AT A 

CONTROLLED SPEED. DISENGAGE WHEEL LOCK PINS 

TO PERMIT FREE-WHEELING ONLY WHEN ENGINE IS 

STOPPED.
THIS IS A MOTORIZED ROTARY TILLER THAT 

WORKS THE SOIL BY MEANS OF ROTATING TINES.  

IT IS PEDESTRIAN CONTROLLED, BUT NOT SELF-

PROPELLED, WITH A GASOLINE-FUELED INTERNAL 

COMBUSTION ENGINE TO POWER THE TINES.  IT 

SHALL NOT BE USED FOR ANY OTHER PURPOSE.

   

WARNING

HOT GASES ARE A NORMAL BY-PRODUCT OF A 

FUNCTIONING INTERNAL COMBUSTION ENGINE. 

FOLLOW ALL SAFETY INSTRUCTIONS TO PREVENT 

BURNS AND FIRES.
DO NOT ALTER/MODIFY ENGINE:
NEVER ALTER OR MODIFY THE ENGINE FROM 

THE FACTORY. SERIOUS INJURY OR DEATH MAY 

OCCUR IF ENGINE IS MODIFIED OR ALTERED.
WHEN WORKING ON OR REPLACING PARTS FOR 

THE ENGINE OR PRODUCT, YOU MUST ALWAYS 

FLIP THE ON/OFF SWITCH TO THE OFF POSITION.

   

CAUTION

L

R

• 

Handle fuel with care; it is highly flammable.

a.  Use an approved fuel container.
b.  Never add fuel to a running engine or hot engine.
c.  Fill fuel tank outdoors with extreme care. Never fill 

fuel tank indoors. 

d.  Replace gasoline cap securely and clean up spilled 

fuel before restarting.

Содержание CountyLine 20970

























Отзывы: