background image

Operator’s Manual 

20970 Front Tine Tiller

For additional information email 

[email protected]

 or call 800-345-6007 M-F 8-5 CST

5

ENGINE SAFETY PRECAUTIONS

If your product comes with a separate engine manual, be 

sure to read and follow all safety and warning precautions 

outlined there, in addition to any in this manual.
Preventing Carbon Monoxide Poisoning

• 

 Always start and run engine outdoors.  Do not start 

or run engine in an enclosed area, even if doors or 

windows are open.  

• 

Never try to ventilate engine exhaust indoors. Carbon 

monoxide can reach dangerous levels very quickly.

• 

Never run engine outdoors where exhaust fumes may 

be pulled into a building.

• 

Never run engine outdoors in a poorly ventilated area 

where the exhaust fumes may be trapped and not 

easily taken away. (Examples include: in a large hole 

or areas where hills surround your working area.)

• 

Never run engine in an enclosed or partially enclosed 

area. (Examples include: buildings that are enclosed 

on one or more sides, under tents, car ports or 

basements.)

• 

Always run the engine with the exhaust and muffler 

pointed in the direction away from the operator.

• 

Never point the exhaust muffler towards anyone. 

People should always be many feet away from the 

operation of the engine and its attachments.

• 

Do not change the engine governor settings or over-

speed the engine.

Gasoline Fires and Handling Fuel Safely

Use extra care in handling gasoline and other fuels. They are 

flammable and vapors are explosive.

• 

When storing extra fuel be sure that it is in an 

appropriate container and away from any fire hazards.

• 

Prevent fire and explosion caused by static electric 

discharge. Use only nonmetal, portable fuel 

containers approved by the Underwriter’s Laboratory 

(U.L.) or the American Society for Testing & Materials 

(ASTM).

• 

Never remove the fuel cap or add fuel with the engine 

running. Stop engine and allow to cool before filling.

• 

Do not smoke.

• 

Never drain fuel from engine in an enclosed area.

• 

Always fill fuel tank outside in a well ventilated area. 

Never fill your fuel tank with fuel indoors. (Examples 

include: basement, garage, barn, shed, house, porch, 

etc.) Never fill tank near appliances with pilot lights, 

heaters, or other ignition sources.  If the fuel has to be 

drained, this should be done outdoors. The drained 

fuel should be stored in a container specifically 

designed for fuel storage or it should be disposed of 

carefully.

• 

Always wipe up excess (spilled) fuel from engine 

before starting. Clean up spilled fuel immediately.  

If fuel is spilled, do not start the engine but move 

product and fuel container from area. Clean up spilled 

fuel and allow to evaporate and dry after wiping and 

before starting.

• 

Allow fuel fumes/vapors to escape from the area 

before starting engine.

• 

Test the fuel cap for proper installation before starting 

and using engine.  

• 

Always run the engine with fuel cap properly installed 

on the engine.

• 

Never smoke while refilling engine fuel tank.

• 

Do not store engine with fuel in fuel tank indoors. Fuel 

and fuel vapors are highly explosive. 

Preparation

• 

Dress appropriately when operating the tiller. Always 

wear sturdy footwear. Never wear sandals, sneakers 

or open shoes, and never operate the tiller with 

bare feet. Do not wear loose clothing that might get 

caught in moving parts.

• 

Carefully inspect the area to be tilled and remove 

all foreign objects. Do not till above underground 

water lines, gas lines, electric cables, or pipes. Do not 

operate the tiller in soil with large rocks and foreign 

objects which can damage the equipment.

• 

Disengage all clutches and leave control lever in the 

neutral position before starting the engine.

 

WARNING

ENGINES GIVE OFF CARBON MONOXIDE, AN 

ODORLESS, COLORLESS, POISONOUS GAS. 

 

CARBON MONOXIDE MAY BE PRESENT EVEN IF 

YOU DO NOT SMELL OR SEE ANY ENGINE EXHAUST. 

BREATHING CARBON MONOXIDE CAN CAUSE 

NAUSEA, FAINTING OR DEATH, IN ADDITION TO 

DROWSINESS, DIZZINESS AND CONFUSION.  
IF YOU EXPERIENCE ANY OF THESE SYMPTOMS, 

SEEK FRESH AIR AND MEDICAL ATTENTION 

IMMEDIATELY.  

 

WARNING

HOT GASES ARE A NORMAL BY-PRODUCT OF A 

FUNCTIONING INTERNAL COMBUSTION ENGINE. 

FOLLOW ALL SAFETY INSTRUCTIONS TO PREVENT 

BURNS AND FIRES.
DO NOT ALTER/MODIFY ENGINE:
NEVER ALTER OR MODIFY THE ENGINE FROM 

THE FACTORY. SERIOUS INJURY OR DEATH MAY 

OCCUR IF ENGINE IS MODIFIED OR ALTERED.
WHEN WORKING ON OR REPLACING PARTS FOR 

THE ENGINE OR PRODUCT, YOU MUST ALWAYS 

PUT THE ON/OFF SWITCH TO THE OFF POSITION.

Содержание CountyLine 20970

























Отзывы: