p13
6. ERROR MESSAGES
2000
OPEN
ERR1
Measure in overrange
Sensor rupture
Value set out of range
To enter the value again
press
(see p8)
----
OL
ERxx
Upper or lower electrical
overstepping of the input
Displayable value overload
Self-diagnosis error
(see p8)
OPEN
ERxx
SIMU
----
6.1 Blinking of the led ON
:
Fast blinking
: Self-diagnosis active (display )
Slow blinking
:
Sensor rupture detected (display )
Upper or lower electrical overstepping of the input (display )
The converter is blocked in mode
7. GENERAL WARRANTY TERMS
WARRANTY applying and duration
This instrument is under warranty for a duration of 1 year against any
design or manufacturing defects, under normal operating conditions.
Processing conditions * :
The processing not under warranty will be
submitted to the acceptance of a repair estimate. The customer will
return the products at his charge, and they will be restored to him after
processing. Without a written agreement on the repair estimate within 30
days, products will not be held.
* Complete warranty terms and details available on request.
8. LEXIQUE
Acess to the programming of the input and output parameters
Code for access to the programming of the input and output
parameters
Programming of a new access code
Access to the display simulation
Access to the simulation of the analog output
READ
LOAD
PROG
GENE
CODE
SIMU
PCOD
Messages shown by the converter in mode programming and/or in
mode reading
General access
Access to the teleloading of programming files
Access to the reading of the parameters
INP
TYPE
Input
Access to the input programming submenu
Input type
Voltage input
TEMP
CAPT
RTD
T0
0 C
0 F
Type of temperature sensor
Pt100 input
Type of degrees
Degree Celcius
Degree Fahrenheit
Input shifting
Offset shifting
Slope and offset shifting, display down scale
Adjusting of the display down scale
Slope and offset shifting, display full scale
Adjusting of the display full scale
dDIS
ADJ
ADJ
FDIS
ADJ
OFFS
