ARDESTO RVC-S1200B, Инструкция по эксплуатации, Страница: 67 / 80

EN
67
4.5 Use of Magnetic boundary strip
Attention! Please always put the magnetic boundary strip FLAT on the ground to make it
effective. Cut off the extra length when need.
C L E A
N
Use the Magnetic Boundary strips to quickly and easily create “no-go zones” to keep ROBOT
out of the areas you would like it to avoid.
These may include:
• Near power cords that might cause tangles
• Fragile objects that may be damaged.
• Doorway thresholds. Your robot can easily climb over most common thresholds. However
in some situations they may present a challenge.
Use the boundary strips to block off these areas.
• Around furniture with low or narrow space that may trap your robot.
Remark
1. If the Boundary strip is too long for no-go area, cut it 50cm Minimum to the desired
length so that it covers the entire perimeter of an object or spans the length of the
doorway you want to block off.
2. Place the strips on the floor or around an area rug to create perimeters around the
objects and areas you’d like to block. NOTE: If blocking an object, place the Boundary
strip 5cm in front to ensure ROBOT will not bump into it.