EN
22
MAINTENANCE AND CLEANING
Regular and thorough cleaning will help your infrared
heater work efficiently for many years without problems.
Reflector (reflecting mirror) and quartz glass tubes
must be checked at least once a month against dirt. If
dirty, cleaning and maintenance instructions should be
applied. Depending on the amount of dust in the usage
environment the said checks should be performed more
frequently.
When cleaning the device and after long-term storage it
is recommended to check the power cord and plug. If the
power cord or plug is damaged do not use the device and
contact an authorized service center for replacement of the
damaged parts.
It is recommended to replace the reflector every two years
for more efficient operation of the appliance. Reflector
must be replaced by authorized service.
A clean reflector ensures that the heating efficiency of the
appliance is maximum.
To clean your heater, follow steps below:
1. Unplug the power cord for your safety before cleaning
your appliance.
2. Make sure the heater is cool before continuing
3. To keep the heater clean, the outer shell maybe cleaned
with a soft, damp cloth. Do not use abrasive detergents
to clean the device. After cleaning, dry the unit with
a soft cloth. CAUTION: DO NOT let liquids enter the
heater.
4. If the reflector (reflecting mirror) and quartz glass tubes
are dirty, they should be cleaned with dry air from
outside without opening the protective wire grate of
the device.
Содержание IHS-1650
Страница 28: ......
