EN
16
ultra violet electromagnetic radiation, harmful burns
could still result if an operator is in close contact with
heating tube being operated at high intensity. Because
of the brilliant light emitted by infrared heating tube at
full intensity, is recommended that the eyes be shielded
from the glare if observing the heating tube or radiant
that chamber for an extended period of time. Use
suitable shaded lenses or dark glasses.
23.
Parts of the heater may exceed 200°C. Contact with the
heating tube, reflector, or mental parts near the heating
tube, may cause severe BURNS.
24.
NEVER place hands under the heating elements. ALWAYS
allow heating element to cool at least 10 minutes before
touching the heating tube or adjacent parts.
25.
Observe that all applicable local and national electrical
codes are met and a safe electrical ground system is
installed before attempting to operate the heater. Refer
to the proper installation procedures.
26.
This product contains recyclable materials. Do not
dispose this product as unsorted municipal waste.
Please contact your local municipality for the nearest
collection point.
27.
Obey the same fire safety rules you observe when you
work with hot plate, high intensity infrared heaters,
propane or acetylene torches, soldering irons, and other
equipment that gets very hot.
28.
Know where the nearest fire extinguisher is located and
how to use it.
29.
Know how to put out fire from all types of material near
the infrared heater.
30.
Statement: heater is not located immediately below a
socket-outlet.
31.
Do not use the appliance while sleeping or while you’re
away from where the appliance is located.
32.
Avoid using extension cords, excessive heating may cause
fire. If you have to use an extension cord, make sure that
Содержание IHS-1650
Страница 28: ......