EN
cool. After cleaning, it is advisable to warm the heater for 10 – 20 minutes to dry
the unit and prevent staining.
The lamp used in this series heaters is Ultra long life (10,000 hours). Changing the
lamp should only be carried out by suitably qualified personnel.
TROUBLESHOOTING:
E1 Error on Display:
Control unit overheat. Check installation
clearances.
Let heater cool for 15 minutes and restart
heater.
L1,2,3,4 shows in display, but no heat:
Bulb is damaged. Arrange for replacement
bulb with local Dealer.
RECYCLING
At the end of the electrical products useful life it should not be disposed of with
household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice in your country.