ARDES AR4P17, Инструкция по эксплуатации, Страница: 22 / 28

22
function is on the “H” indicator will be on in the display.
-Push Increase button (6) or Decrease button (7) when the unit is on to
select the desired ambient temperature (automatic working mode) from
10°C to 49°C. The display will show 25°C as default. Each pressure the
temperature increases or decreases by 1°C. During automatic working
mode, the unit select automatically the power according to the difference
between the desired room temperature and the ambient temperature. In
this working mode the appliance can switch between the different power
levels (ventilation, low power, high power) even repeatedly. The selected
power level is always shown on the display. To deactivate this function,
press the Power selection button (2) and select the desired function (fan
only, low power or high power).
REMOTE CONTROL OPERATION:
Batteries
Remote control is supplied with battery inside (CR2025 type, 3V); remove
the transparent sheet from the battery cover before use remote control.
When the battery is over, it must be replaced with the same type.
To remove battery, follow the drawing on the back of remote control.
The pushbuttons of the remote control have the same function of the
pushbutton in the control panel.
WARNING
: on first use or when turning on after a long period of inactivity,
it is normal for the unit to emit a bad smell or a trace of smoke: this will
disappear after a short working time.
GB
Maintenance
This appliance does not require any special maintenance.
Disconnect the plug from the socket and let the appliance cool down well
before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from
entering into the apparatus and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.