ARDES AR4P15, Инструкция по эксплуатации

Страница: 14 / 20

14
GB
Technical informations
1 - Control panel:
A: On/Off pushbutton
B: Power level pushbutton
C: “˄” pushbutton (increase)
D: display with set temperature
E: “˅” pushbutton (decrease)
F: timer pushbutton
G: oscillation pushbutton
2 - Main switch On/Off
3 - Stand
4 - Base
5 - Remote control
A: On/Off pushbutton
B: Power level pushbutton (MODE)
C: “˄” pushbutton (increase)
E: “˅” pushbutton (decrease)
F: timer pushbutton
G: oscillation pushbutton (OSC)
Instructions for use
GB
ASSEMBLY INSTRUCTIONS
Caution! The appliance should always be switched off and does not
connected to the mains supply, if you mounting the appliance.
To fix the base to the body of heater, set the appliance gently on the
head. Use a soft surface to not damage the top of the product.
Unscrew the fastening ring from the stand of the product, place the weight
of the base under the plastic base and place them on the stand making
sure that the hole of the base is coincident to the stand of the product.
Set the base and its weight by using the fastening ring and turn the
product again on its base. Pay attention that all the parts are correct and
firmly connected with each other.
Caution! Connect to the mains supply only after the fan has been fully
assembled.
- The fan must not be used without fixed base
- The device may be operated only in straight and upright position
- This device may not be used in a horizontal position
Technical data indicated on the appliance.