PMX-4EX-SA Manual
page 64
Rev 3.11
16.
HL+/HL-
-Home the axis at high speed and low speed using only the
home sensor.
17.
L+/L-
- Home the axis using only the limit sensor.
18.
JOG+/JOG-
- Move the axis indefinitely in the positive or negative
direction.
19.
ABS
- Perform
absolute move. If more than one axis is selected, an
interpolated move will result.
20.
DAT
- Return to 0 position. If more than one axis is selected, an
interpolated move will result.
21.
Buffer move Tool
– Clicking on this button will provide the user with
an interface to load buffer move commands to the PMX-4EX-SA.
Figure 7.5
a.
Buffer Array List
–
Enter the desired list of buffer commands
here. Once the list is loaded, if the number of commands is
greater than 36 (max buffer size), the program will automatically
send the remaining commands to the PMX-4EX-SA as spaces
clears up in the buffer.
b.
Buffer enable
–
Enable/Disable buffer move mode
c.
Load Move Array
– Once the buffer array list is created, click
here to load the array list to the program.
d.
Start
– Once the array has been loaded, click here to begin
sending the buffered commands to the PMX-4EX-SA. Note that
after the “START” button is clicked, the buffer commands will
a
b
c
d
e
f
g
Содержание PMX-4EX-SA
Страница 1: ...PMX 4EX SA Manual page 1 Rev 3 11 PMX 4EX SA Advanced 4 Axis Stepper Motion Controller ...
Страница 9: ...PMX 4EX SA Manual page 9 Rev 3 11 3 Dimensions 3 1 PMX 4EX SA TBS Dimensions Figure 3 0 ...
Страница 10: ...PMX 4EX SA Manual page 10 Rev 3 11 3 2 PMX 4EX SA TB9 Dimensions Figure 3 1 ...
Страница 19: ...PMX 4EX SA Manual page 19 Rev 3 11 4 11 PMX 4EX SA Interface Circuit Figure 4 10 ...
