ACE-SDC-V3 Manual
page 26
rev 1.08
Digital Input
Description
1
Direction
2
Speed
3
Current Select 1
4
Current Select 2
5
Move Increment
6
Jog Constant
Table 8.0
Note: When in analog mode, only DI1 (direction input) is used.
8.1.4. Digital Output
Figure 8.5
Displays the current digital output status.
DO1 is reserved as a moving output. When the motor is in motion, DO1 is turned
on. DO2 is a general purpose output.
8.1.5. DO Boot
Figure 8.6
This configures the startup states of the two digital outputs. A value of ‘0’ will
disable both digital outputs, a value of ‘1’ will cause DO1 to be enabled, a value
of ‘2’ will enable DO2, and a value of ‘3’ will enable both digital outputs.
