KNX
arcus-eds I
Arcus-EDS GmbH
Rigaer Str. 88, 10247 Berlin
www.arcus-eds.de
arcus-eds
A
VISU
arcus-eds
e7 / Subject to change
Tel.: +49 / (0) 30 / 2593 3914
Fax: +49 / (0) 30 / 2593 3915
Touch_IT V2
Application Description
3,5“ TFT Colour Touch Display
3,5“
TFT Color Touch Display
Application Description
Touch_IT C3_V2
VISU
C3
arcus-eds
I
KNX
Subject to change
Page 6
Arcus-EDS GmbH
www.arcus-eds.de
Rigaer Str. 88 , 10247 Berlin
[email protected]
Tel.: +49 / (0)30 / 2593 3914
Fax.: +49 / (0)30 / 2593 3915
e5
1.2
ETS Objects
If no elements in the pages are activated yet, only the system objects
( 1
–
5)
within topology are displayed.
The
date / time objects
can be used for receiving and / or reading. These are used to synchronize the times in
the KNX bus.
The
ON / OFF object
can be used for receiving and / or reading.
It shows the activity status of the TouchIT. (0 -> OFF 1-> ON or SCREENSAVE ).
Sending a 1 to the device sets it in ON mode (1st page or menu is displayed) regardless of whether
the device is in OFF or in SCREENSAVE mode.
Sending a 0 puts the device in the OFF state, regardless of whether the device is in the ON or SCREENSAVE state.
The
standby object
can be used for receiving and / or reading.
It shows the activity status of the TouchIT. (0 -> OFF or ON 1-> SCREENSAVE ).
Sending a 1 to the device bright it in SCREENSAVER mode regardless of whether the device is in OFF or ON mode.
Sending a 0 puts the device in the OFF state.
The SYSTEM-LED object actuates the optional notification LED (accessory)
and is connected to the usual SIMPLE ALARM.
If
RTC
or
logic function
are used are the corresponding oobjects
(6
–
31)
respectively
(32
–
62)
HVAC Objects
Logic Objects