8
Custom Settings
Enter password
The menu
Custom setting
is protected with a password, wich is “0000”
to access the menu.
Under the menu
Setpoint
the temperature for the unit will
be set.
Under the menu
Alarm Settings
the below menu will be
avaible.
The menu
Alarm delay
is the settings of the
time from an alarm will occur on the unit and
until it will be shown on the display.
The menu
Door open alarm
is the settings of
the time from an alarm will occur on the unit
and until it will be shown on the display.
The menu
High temp. alarm i
s the settings of
the highest temperature the device must be in-
side before it comes with an alarm.
The menu
Low temp. alarm
is the settings of
the lowest temperature the device must be in-
side before it comes with an alarm.
The menu
Log time interval
is the
settings of time for the controller to log data
from the unit.
The
Probe eprom failure
alarm indicate, that
the probe is not working.
The
Power failure
alarm indicate, that there is
no power to the unit.
Probe eprom failure
Under the menu
Select language
you
can select the desired
language.