Arctiko ULTF 220, Руководство по эксплуатации, Страница: 8 / 20

8
Custom Settings
Enter password
The menu Custom setting is protected with a password, wich is “0000”
to access the menu.
Under the menu Setpoint the temperature for the unit will
be set.
Under the menu Alarm Settings the below menu will be
avaible.
The menu Alarm delay is the settings of the
time from an alarm will occur on the unit and
until it will be shown on the display.
(Only temperature alarms)
The menu Door open alarm is the settings of
the time from an alarm will occur on the unit
and until it will be shown on the display.
The menu High temp. alarm i s the settings of
the highest temperature the device must be in-
side before it comes with an alarm.
The menu Low temp. alarm is the settings of
the lowest temperature the device must be in-
side before it comes with an alarm.
The menu Alarm log time interval is the
settings of time for the controller to log data
from the unit.
The Probe eprom failure alarm indicate, that
the probe is not working.
The Power failure alarm indicate, that there is
no power to the unit.
Setpoint
Probe eprom failure
Under the menu
Select language you
can select the desired
language.