5
■
Frontal panel
■
Quick start
1. DISPLAY
The upper display
shows the temperature of the room probe.
The lower display
shows the temperature of the inserts probe or the count down timer. To pass
to the one insert probe to the another one use the DOWN key.
- Temperature.
- Timer or insert probe
- Alarm and status icons.
If an icon or LED is on, the correspondent function is enabled.
If an icon or LED is flashing, the correspondent function is delayed.
2. KEYBOARD IN STAND BY
HOW TO SELECT A CYCLE
:
Push and release the (3) key till the
desired cycle is selected.
HOW TO START A CYCLE
: Push and release
the START/STOP
button (2). Il The
correspondent yellow LED is switched on..
HOW TO TEMPORARILY STOP THE RUNNING CYCLE.
1. Press and release the key.
2. The compressor and the fan will be stopped for the PAU time (see parameters list) and the flashing
message “Stb” will be displayed.
3. To restart the cycle press and release the key, the cycle will restart from the some point at which it was
interrupted.
4. In any case the cycle automatically restarts after the PAU time.
HOW TO STOP A CYCLE
: hold pushed the
START/STOP button (2) till the yellow LED will be
switched Off.
HOW TO SET THE TIME (RTC)
