Arctic AG10E, Руководство пользователя

Страница: 5 / 31

AG6E/AG8E/AG10E
Page 5 www.arcticsnowplows.com
- Disconnect electric and/or hydraulic power and tag out if required before
servicing or performing maintenance.
-Do not allow hands, hair or clothing to get near any moving parts such as
spinner, chain etc.
-Do not wear neckties or loose clothing when working on the vehicle. These
things can catch on moving parts or cause an electrical short circuit that could
result in personal injury. Do not wear wrist watches, rings or other jewellery when
working on the vehicle or individual equipment
-Do not allow unauthorized person to operate this unit.
-Do not work on a vehicle without having a fully serviced fire extinguisher
available. (Dry chemical unit specified for gasoline, chemical or electrical fires).
-Do not smoke while working on the vehicle. Gasoline and battery acid vapours
are extremely flammable and explosive.
-Do not alter the sander, or any part without written approval of Arctic Equipment
Manufacturing Corporation.
-Do not use your hands to search for hydraulic fluid leaks; escaping fluid under
pressure can be invisible and can penetrate the skin and cause injury.
- Do not leave unused material in hopper. Material can freeze or solidify,
causing unit to not work properly. Empty and clean after each use.
-Inspect the sander periodically for defects. Parts that are loose, broken, missing
or plainly worn must be tightened or replaced immediately.
-Check the job site for terrain hazards, obstructions and people. Check
surrounding area for hazardous obstacles before operating this unit.
-Wear safety goggles when working on the vehicle to protect your eyes from
battery acid, gasoline, and dust or dirt from flying off of moving engine parts.
-Be aware of and avoid contact with hot surfaces such as engine, radiator, and
hoses.
-Wear safety glasses with side shields when striking metal against metal. Failure
to heed could result in injury to the eye(s) or other parts of the body.