ARCTIC WIND 2AD22A, Руководство пользователя

Страница: 15 / 20

14
REMOVING THE COLLECTED WATER
CONTINUED
Note:
The pump may make a noticeable sound for 3~5 minutes on startup. It is a normal phenomenon.
Check the following things:
• Clean pump filter
• Remove the bucket from the unit, take down the pump and clean the pump filter.
• Check that the pump drain hose is not kinked or blocked.
• Empty the water of the bucket.
• Reinstall the pump hose if it is disconnected from the unit and properly reinstall the bucket.
• Turn on the unit. If the error repeats, call for service.
• Empty the bucket once a week when using the pump drain feature.
• When the pump drain feature is not being used, remove the pump drain hose from the outlet.
• Press the pump drain hose outlet in towards the unit and pull the drain hose out (See Fig.13).
• Be careful to prevent water from leaking onto the floor.
Note:
The pump operation light will blink will at 1Hz if there is an operational failure of the pump.
Please turn off the unit and unplug the power.
Note:
Do not use this operation when the outdoor temperature is equal to or less than 0°C (32°F),
otherwise water will freeze inside the hose resulting in unit failure.