ARCTIC WIND 2AD22A, Руководство пользователя

Страница: 13 / 20

12
REMOVING THE COLLECTED WATER
There are three ways to remove collected water:
Using the bucket
• If the unit is off, and the bucket is full, the Full indicator light will illuminate.
• If the unit is on and the bucket is full, the compressor and the fan will turn off, the Full indicator
light will light will illuminate and the LED display will show P2.
• Slowly pull out the bucket. Grip the left and right handles securely, and carefully pull out straight
so water does not spill. Do not put the bucket on the floor because the bottom of the bucket is
uneven and the water may spill.
• Throw away the water and replace the bucket.
• The bucket must be replaced correctly and securely seated for the dehumidifier to operate.
• The machine will re-start when the bucket is returned to its correct position.
NOTE:
• When you remove the bucket, do not touch any parts inside the unit. Doing so may damage the product.
• Be sure to push the bucket gently all the way into the unit. Banging the bucket against anything or failing to push it in
securely may cause the unit not to operate.
• If the pump hose drops when you remove the bucket, you must reinstall the pump hose properly to the unit before
replacing the bucket into the unit.
• If there is some water in the unit after you remove the unit after you remove the bucket, you must dry it.
• If the bucket is removed while the unit is running, the compressor and the fan will turn off, the unit will beep 8 times
and the digital display will show P2.
• If the bucket is removed while the unit is turn off, the unit will beep 8 times and the digital display will show P2.
1