Arctic King WDK Series, Руководство пользователя

Страница: 8 / 20

Page 8
Oper
ating
Ins
tructions
4. TIMER Pad
Press to initiate the Auto start and Auto
stop feature, in conjuction with the
and
key pads.
5. Up/Down Pads ( / )
• Humidity Set Control Pads
The humidity level can be set within a
range of 35% RH (Relative Humidity)
to 85% RH (Relative Humidity) in 5%
increments.
For drier air, press the
pad and set
to a lower value (%).
For damper air, press the
pad and
set a higher value (%).
• TIMER Set Control Pads
Use the and pads to set Auto
start and Auto stop time 0.0 to 24.
6. POWER Pad
Press to turn the dehumidifier on and off.
7. Display
Shows the set % humidity level from 35%
to 85% or auto start/stop time (0 ~ 24)
while setting, then shows the actual (+/-
5% accuracy) room % humidity level in a
range of 30% RH (Relative Humidity) to
90% RH (Relative Humidity).
Error Codes and Protection Code:
AS
- Humidity sensor error - Unplug
the unit and plug it back in. If error
persists, contact Customer Service.
ES
- Temperature sensor error - Unplug
the unit and plug it back in. If error
persists, contact Customer Service.
Other Features
Bucket Full Light
Glows when the bucket is ready to be
emptied, or when the bucket is removed
or not replaced in the proper position.
Auto Shut Off
The dehumidifier shuts off after 30
seconds when the bucket is full, or when
the bucket is removed or not replaced
in the proper position.When the setting
humidity is reached, the unit will be shut
off automatically. For some models,the
fan motor will continue operating.
Auto Defrost
When frost builds up on the evaporator
coils, the compressor will cycle off and
Auto Defrost function will run until the
frost disappears.
Wait 3 minutes before resuming operation
After the unit has stopped, it can not be
restarted in the first 3 minutes to protect
compressor operation. The unit will
restart automatically after 3 minutes.
Auto-Restart
If the unit stops unexpectedly due to
a power cut, it will restart with the
previous function setting automatically
when the power resumes.
P2
- Bucket is full or bucket is not in right
position - Empty the bucket and
replace it in the right position
3. FAN Pad
Control the fan speed. Press to select
either High or Normal fan speed. Set the
fan control to High for maximum moisture
removal. When the humidity has been
reduced and quiet operation is preferred,
set the fan control to Normal.