Arctic King 15625013, Руководство оператора

Страница: 13 / 25

13
CAUTION
Clean your air conditioner occasionally to keep it looking
new. Be sure to unplug the unit before cleaning to
prevent shock or fire hazards.
Air Filter Cleaning
Air Filter Cleaning
The air filter should be checked at least once a month to see
if cleaning is necessary. Trapped particles in the filter can
build up and cause an accumulation of frost on the cooling
coils.
CARE AND CLEANING
Displays
O O Shows the set temperature in
"
C
"
or
"
F
"
and the
Auto-timer settings. While on Fan-only mode, it shows
the room temperature.
DISPLAYS:
- Evaporator temperature sensor error. Unplug the
unit and plug it back in. If error repeats, call for
service.
NOTE:
" "
is displayed as shown in the left picture.
HS - Electric heating sensor error. Unplug the unit and
plug it back in. If error repeats, call for service.
Error codes:
AS- Room temperature sensor error. Unplug the unit
and plug it back in. If error repeats, call for service.
NOTE: In Fan-only mode, it will display
"
LO
"
or
"
HI
"
.
If the unit stops unexpectedly due to a power outage,
it will restart with the previous function setting
automatically when the power resumes.
The louvers will allow you to direct the air flow up or
down (on some models) and left or right throughout
the room as needed. Pivot horizontal louvers until
the desired up/down direction is obtained.
Move the levers from side to side until the desired
left/right direction is obtained.
Levers
Air Direction
DISPLAYS:
NOTE:
Air Directional Louvers
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating procedure,
here are more features in your control that you should
become familiar with.
The Cool circuit has an automatic 3 minute time-
delay start if the unit is turned off and on quickly.
This prevents overheating of the compressor and
possible circuit breaker tripping. The fan will
continue to run during this time.
The control is capable of displaying temperature in
degrees Fahrenheit or degrees Celsius. To convert
from one to the other, press and hold the left and
right Temp/Timer buttons at the same time for 3
seconds.
Fresh Air Vent Control
Fig. A
VENT CLOSED
Fig. B
VENT OPEN
Fig. C
VENT AND
EXHAUST OPEN
The fresh air vent allows
the air conditioner to:
1. Recirculate inside air
when the vent closed
(see Fig.A).
2. Draw fresh air into the
room when the vent is
open (see Fig.B)
3. Exchange air from the
room and draws fresh
air into the room when
both the vent and exhaust
are open (see Fig.C).
(on 10000 - 12000 BTU/hr models):
AIR CONDITIONER FEATURES