45
2. Middle Button — Shifts middle dis-
play through speedometer, RPM,
clock, odometer, trip 1, trip 2, and
engine hours.
3. Right Button — Shifts bottom display
through coolant temperature, battery
voltage, intake air temperature, fuel
level, and tachometer.
4. Speedometer/Tachometer/Clock Dis-
play — Indicates approximate vehicle
speed in MPH or KM/H when speed-
ometer function is selected, RPM when
tachometer function is selected, or time
when clock is selected. Press the Left
Button to change which parameter is
being displayed. With speedometer
selected, press and hold the Left Button
to shift between standard (MPH/miles/
Fahrenheit) and metric (km/h/kilome-
ters/Celsius).
To set the clock, use the following pro-
cedure:
A. With the clock mode selected, press
and hold the Middle Button to set
the clock. Press the Left or Right
Button to alternate between 12-
hour or 24-hour modes.
B. Press the Middle Button to set the
hours. Press the Left button to
decrease the hours or the Right
Button to increase the hours.
C. Press the Middle Button to set the
minutes. Press the Left Button to
decrease the minutes or the Right
Button to increase the minutes.
D. When the proper time has been set,
press the Middle Button to return to
the main gauge display.
5. Engine Hour Meter/Odometer/Trip
Meter/Speedometer/Tachometer/
Clock Display — Displays engine
hours, odometer, trip meter, speedom-
eter, tachometer, or clock. Press the
Middle Button to change which
parameter is being displayed. The
Engine Hour Meter and Odometer
cannot be reset. To reset the trip
meter, select the Trip Meter; then
press and hold the Middle Button
until the trip meter display reads 0.
NOTE: The engine hour meter will
not activate until engine speed
exceeds 500 RPM.
NOTE: An item can only be dis-
played in this position if it is not
already being displayed in the top
display. To set the clock when the
clock is in this position, press and
hold the Middle Button; then use the
procedure found in 4.
6. Coolant Temperature/Battery Volt-
age/Intake Air Temperature/Fuel
Level Display — Displays coolant
temperature, battery voltage, intake
air temperature, fuel quantity, and
RPM. Press the Right Button to
change which parameter is being dis-
played. Press and hold the Right But-
ton to see the actual values associated
with the mode selected.
NOTE: High engine RPM, low vehi-
cle speed, or heavy load can raise
engine temperature. Decreasing
engine RPM, reducing load, and
selecting an appropriate transmis-
sion gear can lower the temperature.
NOTE: Debris in the engine com-
partment (or packed between the
cooling fins of the radiator) can
reduce cooling capacity. Using a
garden hose, wash the radiator and
the engine to remove any debris pre-
venting air flow.
7. Gear Position Indicator — Indicates
which gear is selected.
8. Differential Lock Indicator — Dis-
plays LOCK when the differential
lock has been engaged.
CAUTION
Continued operation with high
engine temperature may result in
engine damage or premature wear.
CAUTION
Do not use a pressure washer to
clean the radiator core. The pressure
may bend or flatten the fins causing
restricted air flow, and electrical
components on the radiator could be
damaged. Use only a garden hose
with spray nozzle at normal tap pres-
sure.
