Arctic Cat 400 3in1 Скачать руководство пользователя страница 34

Страница: 34 / 80

��

Page 32

Break-in procedure

New ATV’s and renewed ATV en-

gines require a „break-in“ period.

The first month is most critical to

the life of this ATV. Proper opera-

tion during this break-in period will

help assure maximum life and per-

formance from the ATV.

During the first 10 hours of opera-

tion, always use less than _ throt-

tle. Varying the engine RPM during

the break-in period aids the engine/

transmission component mating

process. Although it is essential to

place some stress on the engine

components during break-in, care

should be taken not to overload

the engine too often. Do not pull a

trailer during the break-in period.

When the engine starts, allow it to

warm up properly. Idle the engine

several minutes until the engine

has reached normal operating

temperature. Do not idle the engine

for excessively long periods of

time.

During the break-in period, you

should not use more than throttle.

Short acceleration maneuvers and

riding at different velocities provide

an optimum break-in of the engine

During the break-in period you

must also burnish brake pads

(hydraulic brake) to achieve full

braking effectiveness. To properly

burnish the brakes, use the follow-

ing procedure:

BRAKE BURNISHING PROCEURE:

The main brake is activated by

the foot pedal (according to direc-

tive 93/14A EC homologation).

The hand lever activates only the

parking/auxiliary brake which must

not be used as service brake.

For off road use, there is the

possibility to exchange the brake

circuits - thus, the service brake is

activated by the hand lever.

For this purpose an appropriate

conversion kit is available. For more

details, please ask your dealer.

!! IMPORTANT !!

For perfect brake efficiency you

have to burnish the brake pads.

To do so, please follow the instruc-

tions below:

1. Choose an area sufficiently large

to safely accelerate your ATV to 30

km/h.

2. Accelerate to 30 km/h, then com-

press brake lever to decelerate to 0

– 5 km/h.

3. Repeat this procedure approx.

20 times until brakes are heated

up.

ENGLISCH

21.05.2006, 14:47 Uhr

Содержание 400 3in1

















































































Результаты поиска

Содержание 400 3in1

Отзывы:

Arctic Cat 400 3in1, Руководство пользователя, Страница: 34 / 80

Результаты поиска

Содержание 400 3in1

Отзывы: